| ORIGINAL ARTICLE |
|
| Year : 2019 | Volume
: 4
| Issue : 2 | Page : 49-56 |
|
|
Patient health monitoring system based on zigbee communication protocol
Mohanad Abdulhamid1, Kiprono Victor2
1 Department of Electrical Engineering, Al-Hikma University, Baghdad, Iraq
2 Department of Electrical Engineering, University of Nairobi, Nairobi, Kenya
Correspondence Address:
Dr. Mohanad Abdulhamid
Al-Hikma University, Baghdad
Iraq
 Source of Support: None, Conflict of Interest: None  | Check |
DOI: 10.4103/ijas.ijas_11_19
|
|
|
This study presents a review of ZigBee communication protocol and a wireless sensor network (WSN) for monitoring patients' physiological conditions continuously using ZigBee communication protocol. The physiological conditions monitored are body temperature and pulse rate. The body temperature and pulse rate are monitored by ZigBee sensor nodes for each patient, and the output is transmitted via ZigBee communication protocol to a ZigBee base node. A peer-to-peer network topology is implemented with three ZigBee sensor nodes and a ZigBee base node. The observed physiological signals are then sent from the ZigBee base node to a remote wireless monitor hosted in a personal computer via a universal serial bus. The remote wireless monitor is made of a web server and web interface. The medical attendant can then simultaneously monitor remotely multiple patients from one patient monitoring station.
|
|
|
|
| [FULL TEXT] [PDF]* |
|
 |
|
